GL TECHNICS

 The PERFECTA 20 DESIGN PLUS brake maintenance device takes the brake fluid directly from the 20 liter original container. There is no decanting of the fluid. The moveable device can be operated without any difficulty by one man. It is equipped with a continuously adjustable pressure regulator and a universal rubber cone with integrated sieve.

The continuously adjustable pressure regulator and an extraction tube with a sieve are also part of the equipment, together with the integrated PERFECTA PLUS pre-extraction. The device can also be supplied in 110 V-design.

The PERFECTA 3 model is ideally suited to mobile use in brake maintenance. It has all the basic characteristics of the PERFECTA series.

The working pressure is fixed at 2 bar. A rubber cone set is included.

DELIVERY INCLUDES:

•Device with adapter E 20 (Euro adapter). 

•Set of rubber cones

When exchanging the diesel filter or the fuel high pressure pump, air remains in the lines after the fuel is drained. Before the engine can be re-started, the diesel lines must therefore be purged. Electric DEG Diesel venting device quickly and safely purges HDEP/MDEG diesel engines, transporting diesel fuel via a powerful pump into the lines so that air bubbles trapped in the system are completely cleared from the fuel circuit.

The compact digital hand tire inflator measures the tire pressure and inflates and deflates tires very quickly and accurately. It offers the following advantages in comparison with other similar commercial appliances:

Analog pressure manometers are very sensitive to impacts.
With the von GL TECHNICS digital hand tire inflator, the electronic pressure sensor in the interior is well protected by a fuller rubber surround above the housing. This makes the appliance durable and robust.

The High-End-Version of flushing devices, the AGS 20, can change automatic gear oil without problems and clean the gears in the same work process. It has two steel containers for old and new oil each with a volume of 20 liters. Two high-performance filters (20 µm) clean the old and new oil during the flushing process. The old oil can be emptied easily and disposed of in the collecting system.